Security Alarms AR6000 Manual de usuario descargar pdf (Pagina 31)

DOTH-300

APPLICATION

MANUAL

Date

2013-07-15

Rev

1.04

Page

1-31

- AB: All Inventory type A and B tag is read.

¶ NOTE. Typically, using the A or AB.

▪ Q: The option to use when reading multiple tags. Its range is between 1~32768.

¶ NOTE. Typically, using the ~32tags.

▪ Select Mask: Used to detect tag you already selected only. Select a tag from the list of previously read tag

and check.

▪ EPC: EPC data output is set.

: EPC data is output only.

: PC and EPC data is output.

¶ NOTE. EPC Mode is supported in the H300XX_KeyWedge_R0310.CAB version and above.

■ Data Format: Set the data output format. (HEX STRING, ASCII)

¶ NOTE. Data Format is supported in the H300XX_KeyWedge_R0312.CAB version and above.

▪ Tx Power control: Used to control the RF output power.

The following table indicates the effects of setting the width of the attenuation.

(unit. dBm)

Max

Att1

Att2

Att3

Att4

Att5

Att6

Att7

Att8

Att9

-3

-6

-9

-12

-15

-18

-21

-24

-27

▪ Firmware Ver: UHF firmware version will be displayed.

▪ Factory Reset: Resets all the settings of the UHF RFID.

¶ NOTE. Tx Power adjustment, you can adjust the tag read distance.

¶ NOTE. Tx Power higher, tag read distance is increased. But, Increases the battery consumption.

If you want to save changes in settings and exit, tap OK.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 72 73

D.O.Tel 1
DOTH-300 10

Comentarios a estos manuales

Sin comentarios

Security Alarms AR6000 Manual de usuario Pagina 31

Comentarios a estos manuales