Security Alarms AR6000 Guía de usuario Pagina 40
- Pagina / 96
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
40 SPEKTRUM DX6 • AIRCRAFT PROGRAMMING GUIDE
EXPONENTIAL
Programmable exponential adjustments are offered on the aileron and elevator channels on the DX6 system.
Exponential is a function that allows you to tailor the response rate of the controls as compared to the stick
inputs. The purpose of exponential is to reduce the sensitivity in the middle portion of stick movement, while
still allowing full travel at the end of the stick movement. The adjustable range of the Exponential function is
from 0–100%. Zero percent (0%) is linear stick control which means that the response rate is equal throughout
the stick control. One hundred percent (100%) is full exponential. The larger the exponential value, the less
servo action, or sensitivity, you will notice around the neutral setting.
Note: The Exponential function operates in conjunction with the Dual Rate function.
It is imperative to understand the Dual Rate function prior to adjusting the exponential
values. Exponential may be selected independently for either the high or low rate
(position 0 or 1) or both.
�
ACCESSING THE EXPONENTIAL FUNCTION
1. Turn on the transmitter.
2. Press the SCROLL and INCREASE buttons simultaneously to enter the Function mode.
3. Press the SCROLL button until “EXP” appears at the left side of the screen.
4. Press the CHANNEL button until the desired channel appears on the screen (AI or EL).
5. Using the appropriate dual rate switch, select the correct position to be adjusted (0 or 1).
6. Press the INCREASE or DECREASE buttons to INCREASE/DECREASE the exponential value.
7. Press the SCROLL button to access the Sub-Trim function.
8. To exit, press the SCROLL and INCREASE buttons simultaneously.
- 6-Channel, 10-Model Memory 1
- DSM Parkflyer and 1
- Micro Helicopter System 1
- Parkflyers Only 2
- How DSM Works 2
- Table of Contents 3
- Alternate Languages 3
- Aircraft Programming Guide 4
- Helicopter Programming Guide 5
- Warranty 5
- Model Type Selection 6
- Digital Trim Settings 10
- Servo Reversing 10
- Travel Adjustment 11
- Pitch Curve 12
- Throttle Curve 13
- User Guide 14
- 15
- Servo Specifications 16
- Charging the Transmitter 17
- Operating the Trainer System 18
- SPEKTRUM DX6 • INTRODUCTION 19
- DIGITAL TRIM LEVERS 21
- RECEIVER CHANNEL ASSIGNMENT 21
- 22
- HOW TO RANGE TEST THE SYSTEM 23
- HOW TO BIND 24
- CHAPTER 2: CONNECTIONS 25
- THROTTLE CUT 26
- NORMAL DISPLAY 27
- DIRECT TRIM ACCESS DISPLAY 27
- SYSTEM MODE 28
- FUNCTION MODE 29
- MODEL TYPE SELECTION 30
- DATA RESET 31
- DUAL RATE SWITCH SELECTION 32
- WING TYPE SELECTION 33
- FLAPERON SETUP 33
- DELTA-WING MIXING 35
- MODEL SELECTION 36
- MODEL NAME ENTRY 37
- SERVO REVERSING 38
- DUAL RATE 39
- EXPONENTIAL 40
- SUB-TRIM 41
- TRAVEL ADJUSTMENT 42
- AILERON-TO-RUDDER MIXING 43
- 4. To exit, press the 44
- ELEVATOR-TO-FLAP MIXING 45
- DIFFERENTIAL 47
- FLAP-TO-ELEVATOR OFFSET TRIM 48
- PROGRAMMABLE MIXING (A, B, C) 49
- ASSIGNING CHANNELS 50
- SWITCH SELECTION 50
- MIXING VALUE ADJUSTMENT 51
- MIXING OFFSET ADJUSTMENT 52
- ACCESSING THE OFFSET FUNCTION 52
- CHAPTER 8: Data Sheet 55
- KEY INPUT AND DISPLAY 62
- GEAR/GYRO SWITCH SELECTION 69
- IMPORTANT GYRO INFORMATION 69
- CHAPTER 7: Function Mode 72
- THROTTLE HOLD 77
- PITCH CURVE 78
- THROTTLE CURVE 80
- REVOLUTION MIXING 82
- PROGRAMMABLE MIXING (A) 83
- CCPM SWASHPLATE MIXING 88
- 89
- CCPM SERVO LOCATIONS 90
- CCPM SERVO CONNECTIONS 91
- One Year Warranty 93
- FCC Information 94
- 95SPEKTRUM DX6 • WARRANTY 95
- SPMM** #8259 96
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Security Alarms AR6000
(14 paginas)
(3 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.062 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales