Security Alarms AR6000 Guía de usuario descargar pdf (Pagina 48)

48 SPEKTRUM DX6 • AIRCRAFT PROGRAMMING GUIDE

FLAP-TO-ELEVATOR OFFSET TRIM

When the ﬂaps are deployed, most airplanes exhibit pitching tendencies (most pitch nose up with down ﬂap).

Elevator offset trim is designed to prevent this pitching. Flap-to-elevator offset trim automatically changes the

elevator trim to a preset value when the ﬂap switch is activated.

Note: Flap-to-elevator offset trim is also useful as a dual elevator trim even for airplanes without

flaps. This is especially helpful for sailplanes that require one trim setting for launch and another

trim setting for flight.



















ACCESSING THE FLAP-TO-ELEVATOR OFFSET TRIM FUNCTION

1. Turn on the transmitter.

2. Press the SCROLL and INCREASE buttons simultaneously to enter the function mode.

3. Press the SCROLL button until “OFFSET F-E” appears on the screen.

4. Press the INCREASE or DECREASE button to set the desired amount and direction of the elevator offset.

Note: It is helpful to have the flap switch on when making this adjustment.

5. Press the SCROLL button to access the Programmable Mix function.

6. To exit, press the

SCROLL and INCREASE buttons simultaneously.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 95 96

Sin comentarios

Security Alarms AR6000 Guía de usuario Pagina 48