Security Alarms AR6000 Guía de usuario descargar pdf (Pagina 53)

53SPEKTRUM DX6 • DX6 AIRCRAFT PROGRAMMING GUIDE

PROGRAMMING A RUDDER DUAL RATE

Programmable mixing is a powerful feature that offers many creative options. As an example, a dual rate rudder

can be easily added and turned on/ off via a selected switch. By mixing rudder-to-rudder, (4-4) selecting the

desired switch to turn on/off the mix and by assigning positive values to increase the rudder travel, or negative

values to reduce the travel a rudder dual rate is added that offers independent throw values in each direction.

Following are the steps to add a rudder dual rate:















�







PROGRAMMING A RUDDER DUAL RATE

1. Turn on the transmitter.

2. Press the SCROLL and INCREASE buttons simultaneously to enter function mode.

3. Press the SCROLL button until mix “A11” appears at the top right corner of the screen.

4. Press the INCREASE button until 4 (rudder) appears on the screen as the master channel.

5. Press the DECREASE button until 4 (rudder) appears on the screen as the slave channel.

6. Move the rudder stick in the desired direction and press the INCREASE or DECREASE button to set the

desired rudder dual rate travel.

Note: A positive value increases the rudder travel, while a negative value decreases

the rudder travel.

7. Move the rudder stick in the opposite direction to adjust that direction’s value.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 95 96

Sin comentarios

Security Alarms AR6000 Guía de usuario Pagina 53